Download our  Video and Duress Catalog.

Emergency Management Catalog

Download our  Lynx Catalog.

Find the main water supply valve for your property and turn it off. Install the fitting to connect the pipe to your kennel water supply. If the water pressure at your location is greater than 120 psi, install a pressure reducing valve at your kennel water supply. Determine the farthest distance down the water line from the water supply connection that the leads attached to the Electric Water Valve can reach from the selected location of the Control Unit. This is the location where the Electric Water Valve should be placed in the water line. The closer the Electric Water Valve is placed to the Impulse Sprinkler Head(s), the quicker the response of the water spray to barking. Ideally, the Electric Water Valve would be placed just to the inside of the nearest Impulse Sprinkler Head. Cut the pipe at this point and install the Electric Water Valve as per its instructions using the appropriate fittings. Attach the rest of the pipe and install the Impulse Sprinkler Head(s) at their locations with the appropriate fittings. You should now turn the main water supply back on and check for leaks. There should be no water spray since the Electric Water Valve is not electrically activated. If there is some water spray, refer to the directions for the Electric Water Valve for manual operation and turn it off.