Download our  Video and Duress Catalog.

Emergency Management Catalog

Download our  Lynx Catalog.

Using the measurements obtained in Step 2, go to your local hardware store and purchase a sufficient length of 3/4" or 1" pipe (PVC, polyethylene, or copper) to reach between your water supply and the selected location of the Impulse Sprinkler Head(s) along the paths you have selected. Also purchase the necessary plumbing fittings to connect to your water supply (a "tee" or "y"), the pipe fittings needed to install the Electric Water Valve (see the instructions that come with the valve or ask at the hardware store), and the pipe fittings needed to install the Impulse Sprinkler Heads (also see its instructions or ask at the hardware store). The Electric Water Valve has either 3/4" or 1" female pipe fittings and the Impulse Sprinkler Head has a 1/2" male pipe fitting. It is also a good idea to install a cutoff valve in the waterline to the Electric Water Valve. This will allow you to turn the water correction spray off while you are inside the kennels cleaning, and to drain for the winter in cold climates. It may be best to take the Electric Water Valve and Impulse Sprinkler Head with you to the hardware store to be sure you get the right fittings for installation with the pipe. Depending on the length of pipe (and type of pipe selected) required, the hardware bill should total less than $20.00.