Easy Install

Cart

Easy Install

Step 1
	Remove the screws from the bottom side of the modem case. Any modem with a DB-25 plug on the back will work.
Step 2
	Remove the printed circuit board from the case. Be sure to save your screws and case for warranty purposes.
Step 3
	Push a DB-25 cable into the back of the cross-member.
Step 4
	Plug the circuit board's DB-25 connector into the cable connector.
Step 5
	Tighten the thumb screws.
Step 6
	Plug the supplied wall transformer into the AC outlet. Connect the power cable to the modem.

Last Update 01/24/06

We accept Mastercard, Visa, and American Express.

Shipping is normally via UPS ground which takes 4 to 5 days.   You can request shipping via UPS RED (1 day), Blue (2 day), Ground (5 day), or other carriers.

Company PO's accepted upon credit approval.   Credit references are required.

Shipping is same day if ordered before 1:00 PM CST with credit card or COD.

All prices subject to change or approval.

Micro Technology Services - (888) 230-MTSI or (888) 230-6874 Toll free - Email Us